CAMARO6 - View Single Post - What did you do to your 6th Gen Camaro today?!

inlinejohn · 06-16-2019, 11:41 AM

Installed Borla S-Type exhaust. Lift worked PERFECT. Am using the 5000slx WITHOUT extensions. I mounted the ZL1 Add On lift blocks at the most rear location and in front straight down the door pillar (several inches aft of the "factory" location). I read this was the best and it worked amazing as you can see. I was concerned about extensions after reading so many posts, but some said the non-extension method worked fine so I carefully tried it. Flawless!!! Love the exhaust btw. Took me several weeks to decide, since stock sounds pretty good but the Borla is amazing and worth every penny IMHO.

06-16-2019, 11:41 AM	#7111
inlinejohn Drives: 2019 Camaro 1SS_1LE Join Date: Mar 2019 Location: WA State Posts: 16	Borla Installed Borla S-Type exhaust. Lift worked PERFECT. Am using the 5000slx WITHOUT extensions. I mounted the ZL1 Add On lift blocks at the most rear location and in front straight down the door pillar (several inches aft of the "factory" location). I read this was the best and it worked amazing as you can see. I was concerned about extensions after reading so many posts, but some said the non-extension method worked fine so I carefully tried it. Flawless!!! Love the exhaust btw. Took me several weeks to decide, since stock sounds pretty good but the Borla is amazing and worth every penny IMHO. Attached Images Last edited by inlinejohn; 06-17-2019 at 08:34 AM.