Quote:
Originally Posted by KingLT1
Mine has been randomly doing the same thing but you might try this.
-Delete the current WB PID and disconnect HPT scanner.
-Put the car in Accessory mode by holding the start button with foot off the brake for 5-10seconds.
-After the wideband heats up and switches on, connect the HPT scanner.
-Select Add Pid.
-In search box type "Wideband"
-AEM device should show up in external controllers.
-Add that PID to the list, Start car, and Start scanning.
This is the only way to get mine to work and it will be fine for 2-3 different logs then start acting up. My guess is a software glitch.
|
I have the exact same issue and found the same as the only way to fix it.
It used to work non stop Everytime. Now its hit or miss. Messed up a few logs I was taking because I didn't notice till after that it wasn't logging it.