[mblum]

Both inner and outer bleeders were done each time I bled the system. I'm going to see if I can do another ABS bleed procedure.

I've bench bled may master cylinders in the past with good luck but nothing on the 6th gen. I've got LS1 F-Body brakes in my 72 Chevelle and my 97 Trans Am and have had no issue getting a good pedal on those cars, but neither one of those has ABS, which changes things.

Is the process the same to bleed the master cylinder on the 6th gen? It's a last resort but I wan to keep it in mind.