[mblum]

I'm struggling to fix my soft brake pedal problem. After my first track day I had a soft pedal and I flushed with Motul 600, which didn't seem to help much with the soft pedal issue. I did the flush with my motive power bleeder which I have had great luck with on my other vehicles. I figured I must have gotten some air in the system so I did the old fashioned 2 person brake bleed procedure. This also did not help my soft pedal.

So at this point I'm thinking the ABS might have air trapped, I found someone local that had a Snap On scanner that said they could do the ABS bleed. I was there for the procedure and I don't think it was done properly so I would like to do this again. Can anyone recommend an affordable scan tool that can preform this function? I really dont' need a 2K diagnostic tool. I'm avoiding the dealer and want to do this myself. Reason is in our area there are no trustworthy dealers to work on these types of car. I've already had poor service done on my ZL1 and don't want to give them a chance again.

My last thought was if a proper ABS bleed does not fix the soft pedal it may be the master cylinder, which has never gone dry. Does the mastery cylinder need to be removed to be bled?

Thanks for any help.