CAMARO6 - View Single Post

msowers22 · 04-12-2019, 07:09 PM

I'm running a 1/2 drag in Ocala this weekend, I'm using this advice below. Is it solid?

turn all nannies off and don't use PTM or launch control. Hold down the traction control button for 5-7 seconds until both stabilitrak and TC lights illuminate. Do a standard burnout and brake torque to 1100 rpm and go. The torque management is terrible in 1st and 2nd gear so the best 60' you will manage should be 1.69-1.74. Leave the gear selector in "D" and don't use the paddles. On the settings screen, default the exhaust to Track and suspension to "tour". Place the console button in sport to utilize the performance shift mode. Have fun!

04-12-2019, 07:09 PM	#1
msowers22 Drives: 2018 ZL1 Convertable Join Date: Sep 2018 Location: Tampa Posts: 34	1/2 Run this weekend. Need advice I'm running a 1/2 drag in Ocala this weekend, I'm using this advice below. Is it solid? turn all nannies off and don't use PTM or launch control. Hold down the traction control button for 5-7 seconds until both stabilitrak and TC lights illuminate. Do a standard burnout and brake torque to 1100 rpm and go. The torque management is terrible in 1st and 2nd gear so the best 60' you will manage should be 1.69-1.74. Leave the gear selector in "D" and don't use the paddles. On the settings screen, default the exhaust to Track and suspension to "tour". Place the console button in sport to utilize the performance shift mode. Have fun!