CAMARO6 - View Single Post - Edelbrock 2650 build stock setup to 1000hp

Vulcan1 · 04-09-2019, 06:04 PM

I found a 121mm (4.75”) ID coupler over on Aliexpress. It’s a 5mm wall so the OD would be 131mm. 4mm over your 5” dimension. You could use this over your TB and then slide your 5” coupling hose over this if you think you can stretch your 5” hose .157”. It’s made by Hosingtech blue 4ply silicone. $5.63

04-09-2019, 06:04 PM	#95
Vulcan1 Drives: 2018 Hyper Metallic Blue ZL-1 M6 Join Date: Aug 2017 Location: Lexington KY Posts: 75	I found a 121mm (4.75”) ID coupler over on Aliexpress. It’s a 5mm wall so the OD would be 131mm. 4mm over your 5” dimension. You could use this over your TB and then slide your 5” coupling hose over this if you think you can stretch your 5” hose .157”. It’s made by Hosingtech blue 4ply silicone. $5.63 __________________ 2018 ZL-1 Hyper-blue, Heads, Cam, Exhaust, Pulley, CAI, ported TB. 720HP/715TQ.