|
Ted,
When I reassembled my motor with your smooth idle cam and LT4 HPFP, I did not use a lash cap. As a sanity check, I mounted the pump with the mount bolts loose – maybe .10 from tight. When the pump lifter is on the heel of the cam lobe, the pump is sitting flush with the block with no gasket. Is this normal? I was expecting to see a few thousands gap so that I would have a slight preload when installed.
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned
|