Quote:
Originally Posted by laynlo15
I think your doing great, I would consider buying a lowering kit and dropping your ride 1.5 inches and I use the phastech kit. My car has always mph'd better then most and I believe its Aero. My car launches just as hard and have had 1.45 60ft as my best so far on the old motor.
https://www.phastekperformance.com/P...prings-px1.htm |
Thanks laynlo15! I have looked at the lowering springs on and off, just afraid of tire clearance at this point, already rubbing the driver side rear liner. I don't know if i can get into the 1.4's 60ft with the M6, maybe, maybe not. I had no problems hooking, no clutch slippage, going to keep giving it more and more RPM. Most i gave it this weekend was about 3500.
Good luck and have fun in GA!
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80
Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft.
Tuned by EFX Tuning 688hp/632tq
Best 1/4 to date: 10.705 @ 131.92
Last edited by Jhunsberger; 04-01-2019 at 06:29 AM.
|