|
All right, i brought wires from the front blinkers and also brake signal from 3rd brake lamp and so I managed to eliminate the blue/white wire which was common for brake and turn signal. Problem now is other, the turn signal lights will hyperblink now regardless of what led + resistor I use, or classic bulb or whatever, and I came to the conclusion that the white/violet wire has sth to do with this. On OE assembley, the white/violet wire has 12v all the time, unless brake or turn signal is used, then it shows 0v. Now, as I don't use anymore the same circuit for the turn signals, the white/violet wire stays 12v even when I use turn signals and that is causing the hyperblink, any sugestions on how to deal with this?
|