Quote:
Originally Posted by phaedrus
I have a dumb question I need some help with on this tip. Can anyone (Chris227?) tell me exactly how to disconnect the wiring harness clip from the circular rear speaker shown in the attached pic? It has a red tab I slid backwards with a small flat blade screw driver, but I don’t see if anything else needs to be unlocked/pressed/etc or if I just need to pull harder. I’ve pulled pretty hard already so am hesitant to pull harder unless I know that’s the way.
TIA!
|
Can't see it from the pic, but these locking clips typically have an extra hook or tab behind the middle cutout of the red locking tab that needs to be pressed inwards to disconnect the plug.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18