Quote:
Originally Posted by manniej
I have a stock 2016 SS, with a manual 6 speed, and I'm planning to pull the trigger on a nitrous kit. I'm looking at the Nitrous Outlet kit with all the fixings (heater, opener, window switch, etc). It's been quite a while since I've dealt with nitrous but I recall having to adjust timing and replace the spark plugs. I've been reading through posts here but have several questions I was hoping to get some help with.
1.) From what I've read, a 100-150 shot is safe on this car without the need for additional modifications. Does anyone have information contrary to this?
2.) How do I adjust the timing on this car? The Nitrous Outlet WinMax controller states that it has two timing settings but am I correct in assuming that it doesn't actually adjust the timing, or does it?
3.) What plugs are recommended?
4.) Aside from plugs and timing, is there anything else that I'd need look into?
5.) How would this work with launch control? Would I need to adjust the window switch to not activate at all in 1st gear or is there another way to make sure that it doesn't spray during pre-launch?
6.) Where is everyone mounting their switches? I've seen a couple pictures of a switch panel that looks like it would go in the center consol, but can't seem to find anything for sale. I have a couple 3D printers so I can make my own panel if needed but would still like to find an inconspicuous place to mount everything.
7.) What about mounting the WinMax controller? Are there any recommendations on where to mount it?
Thanks for the help!
|
I ran the 100shot on my nitrous outlet kit, with no additional modifications.
The 150shot I made about 6 passes. All in all I loved my nitrous kit and had no issues. I would be careful running the 150 without the Lingenfelter unit to control timing. But my AFR and fuel pressure stayed within safe ranges without it. If you are interested I have a full nitrous outlet kit I’m selling. Filled the bottle 4 times so it’s barely used. I went procharged. 150shot is a blast. I went with a custom pedal trigger. I can send you pictures of how to install the switch.