Quote:
Originally Posted by Agent K
First, thanks for the heads up.
I recently installed a set of ceramic coated catless 1-7/8" ARH headers. My wire harness is ran on top of the firewall not on the side. Your installer took a different route than I did in installing the headers. I didn't have to touch that wire harness. I just checked just to make sure though...all good.
|
He had 3 different ZL1s that he checked and 2 (mine included) was making contact with the header.
What we found is an inconsistent routine of the harness between cars. Didn’t matter if it was an 18 or 19. I figured this would be a quick thing to check since some (like mine) was routed to the side instead of on top of the rail