CAMARO6 - View Single Post - Lt4 fuel system parts on a SS.. Add flex sensor?

EDFHOBBIES · 01-24-2019, 07:48 PM

I'm donating my LT4 hi pressure pump and injectors to the wifes SS with an eforce 2300 blower.. Also installing the DSX low side pump.. may even do the flex sensor if it's worth it, which is my question, How much horse power over 93 will the car make on the mixture (not enough fuel system to run full e85) . Also what are the ratios of pump 93 and say Kroger e85 will it handle?

Current mods:

2300 eforce
Headers
Rotofab
Stock TB
580 rwhp (I noticed some timing retard or stumble in higher rpm that developed took it to the tuner and the high side falling some from original tune almost 3 years ago.) So instead of selling my lt4 stuff I figured donate.

Planed Upgrades:

DSX Aux pump Dave was thinking come in around 2psi
Lt4 hi pressure
Lt4 injectors
Relocated iat sensor in blower
.250 or .500 smaller pulley (left over from my 2650)
DSX Flex kit?
Might even port the snout so we can add a 103 later..

Hoping for 80 hp more on 93

If it makes 80 more on 93 what would the e85 mixture add and what would it consist of?

01-24-2019, 07:48 PM	#1
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	Lt4 fuel system parts on a SS.. Add flex sensor? I'm donating my LT4 hi pressure pump and injectors to the wifes SS with an eforce 2300 blower.. Also installing the DSX low side pump.. may even do the flex sensor if it's worth it, which is my question, How much horse power over 93 will the car make on the mixture (not enough fuel system to run full e85) . Also what are the ratios of pump 93 and say Kroger e85 will it handle? Current mods: 2300 eforce Headers Rotofab Stock TB 580 rwhp (I noticed some timing retard or stumble in higher rpm that developed took it to the tuner and the high side falling some from original tune almost 3 years ago.) So instead of selling my lt4 stuff I figured donate. Planed Upgrades: DSX Aux pump Dave was thinking come in around 2psi Lt4 hi pressure Lt4 injectors Relocated iat sensor in blower .250 or .500 smaller pulley (left over from my 2650) DSX Flex kit? Might even port the snout so we can add a 103 later.. Hoping for 80 hp more on 93 If it makes 80 more on 93 what would the e85 mixture add and what would it consist of? __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber