Quote:
Originally Posted by SteveV
If your hubs are still straight and the warping/cracking is limited to just the rotor rings, this is another option: https://www.knsbrakes.com/c/car-seri...M+GM+Rotor+Hat
There is a good write up in the general forum where a guy with a 1SS 1LE and the 6 piston brakes upgrades to these rotor rings.
Apparently the ZL1 and Z06 with steel brakes use the same rotor ring, but a different hub. |
I do not believe this is true. Zl1 use a 390mm rotor, the c7z iron rotor is a 371mm which is the same as the ss/1le