|
Whipple build
Finally got my Whipple build finished up and on the Dyno.
Setup is:
Whipple 2.9 with 3.5 pulley(8psi)
Ca performance cat deletes
Rotofab dry
Ported LT5 tb
LPE DI pump
LT4 injectors
ZL1 intank with JMS booster
Flex sensor on E80
305/35/20 555r Nitto
I don't have a base line so the Dyno numbers are what they are. It made 596whp in 5th gear @ 8psi on a Dynojet. From what I have seen 5th gear reads 25-30whp low compared to 6th. I'm sure the tires are probably eating a little power too.
For reference there was a C7Z M7 with Headers, Pullies, LT5 tb, CAI, E85, and fuel system, it made 650whp @ 10-11psi. This car also made 700whp on another Dyno.
Fuel system seems to be ok. Low side holding E80 like a champ, the High side pump is maxed and just slightly dropping pressure. It holds E70 like a champ.
I attached a few pics of the build.
Indiana Muscle Car did the Dyno tuning.
Dream Maker Performance assisted with the install.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel
Last edited by KingLT1; 02-17-2019 at 10:37 PM.
|