Quote:
Originally Posted by 02fbody35th
Guys, don’t over think this. Everything you need to mount the can in front of the engine (or anywhere else you want) comes complete in the kit. I mounted mine in front of the engine with the standard bracket that elite sends. You just have to get a little creative and think outside of the box. All I did was take the bottom bolt out of the thermostat housing and replace it with a stud. That’s where I mounted my bracket. If you don’t have a stud you can simply just pull the bolt and sandwich the bracket between it. It’s a tight fit, and you might have to play with it a bit. But it will fit there. Check out my pics. Good luck. Also the bracket looks close to the belt in the pic. But trust me. There is a ton of room between the two.
|
Thanks again for the pictures. This should work very well.