CAMARO6 - View Single Post

17CamaroZL1 · 12-28-2018, 12:10 PM

The ZL1 and other Camaros have 2 different part numbers for the fender. I think the mounts are the same on the stock cars and the difference is in the actual sheet metal. I have looked at them very closely due to an incident and it appears the ZL1 fender flares out more than the other Camaro fenders. It is so hard to tell with just your eyes, but I took measurements from fender to fender across the hood and also from hood to edge of fender lip. Measurements were identical across the hood, but the ZL1 fender sticks out further from the hood to the lip.

12-28-2018, 12:10 PM	#22
17CamaroZL1 Life's Short, Live Fast! Drives: 2017 Hyper Blue A10 ZL1 Join Date: Nov 2016 Location: London, KY Posts: 2,018	The ZL1 and other Camaros have 2 different part numbers for the fender. I think the mounts are the same on the stock cars and the difference is in the actual sheet metal. I have looked at them very closely due to an incident and it appears the ZL1 fender flares out more than the other Camaro fenders. It is so hard to tell with just your eyes, but I took measurements from fender to fender across the hood and also from hood to edge of fender lip. Measurements were identical across the hood, but the ZL1 fender sticks out further from the hood to the lip. __________________ Life's Short, Live Fast! Bone Stock https://youtu.be/rTUv2p4T7OA 10.94 at 128 mph, 11.13 at 127mph 870 DA, https://youtu.be/e_X_LcpFp50 11.19 at 127mph 1100 DA Full exhaust, lower pulley, E35 -10.36 at 133 mph 690 DA straight from the street with a slight spin at launch. TZQPHG '17 ZL1 HBM\|A10\|Nav\|PDR\|CFW Hood\|ZL1 Mats 12/26/2016 Ordered! 2/8/2017 Built!! 3/2/2017 Brought Home!!!