CAMARO6 - View Single Post - Correct PID for boost gauge using Torque Pro.

Epx998 · 12-11-2018, 01:20 PM

I am using Torque pro with an OBDLink MX device to montior some data. Does anyone know which is the correct for monitoring boost with a Magnuson. I found two PIDs, one which is vacuum/boost psi and another that is the intake manifold psi. The intake manifold seems to give me the right number. Idle load gives me 3.5 to 4.5 PSI, under load it goes up a bit and holds steady.

Anyone else mess around with this software (Torque Pro) ?

12-11-2018, 01:20 PM	#1
Epx998 \|Engineer\| Drives: 2016 Camaro SS Join Date: Aug 2016 Location: San Jose, CA Posts: 402	Correct PID for boost gauge using Torque Pro. I am using Torque pro with an OBDLink MX device to montior some data. Does anyone know which is the correct for monitoring boost with a Magnuson. I found two PIDs, one which is vacuum/boost psi and another that is the intake manifold psi. The intake manifold seems to give me the right number. Idle load gives me 3.5 to 4.5 PSI, under load it goes up a bit and holds steady. Anyone else mess around with this software (Torque Pro) ? __________________ 2016 Camaro SS A8 \| Magnuson Heartbeat \| Might Mouse Wild Catch Can \| DSX Flex Fuel \| Eibach Pro Kit \| Flowmaster Outlaw Black Series \| MRR 017 Wheels