CAMARO6 - View Single Post

oldman · 11-28-2018, 11:59 AM

love the sound my cam spec is similar (zero overlap at .050 lift) on 116 lsa, I have the single tip exhaust, and my car sounds like stock or nearly so (long tube with cats). stock cat back. It is hard to tell the car has a cam at all. One day (since I'm not in this for power). I was thinking I need the poser cam on my setup, just to get some parking lot respect. LOL Call it the poser big dog cam good for all poser applications from stock to blower...
http://www.cammotion.com/gen-5-lt-ca...216-232-110-4/

11-28-2018, 11:59 AM	#33
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,346	love the sound my cam spec is similar (zero overlap at .050 lift) on 116 lsa, I have the single tip exhaust, and my car sounds like stock or nearly so (long tube with cats). stock cat back. It is hard to tell the car has a cam at all. One day (since I'm not in this for power). I was thinking I need the poser cam on my setup, just to get some parking lot respect. LOL Call it the poser big dog cam good for all poser applications from stock to blower... http://www.cammotion.com/gen-5-lt-ca...216-232-110-4/ __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.