Quote:
Originally Posted by Jfmoore79
I finally pulled the trigger on a P1X set up from JRE today and couldn’t be happier with my experience. Spoke to Al this morning and he was incredibly nice and helpful in answering my questions. Ted had worked on multiple quotes for me as I continued to change my mind on which direction to go. It’s been said many times but the entire Jannetty crew goes above and beyond. Also, I want to thank EyeFixStuff for his recommendations as my set up will be very similar. Here’s what I ended up with so far:
P1X, black, 9-10 lb pulley
Stage II intercooler
LT4 Fuel system
Voltage Booster
Off road mid pipes
AEM wide band
AEM OBD II gauge
LS3 Front crank seal
JRE Tune
I’m excited for a winter install!
|
Excellent!! Glad to have helped! Ted will get you dialed in with this setup quickly. You’re going to love it. Be sure to post the results and your experience with it.
Edit: not sure if you have a catch can or not, I use the Elite e2x but there are other options as well. If you use a setup for boosted applications it will help with the pressure on the seals.