CAMARO6 - View Single Post

EDFHOBBIES · 10-19-2018, 06:18 AM

I had the issue on my zl1 did an alignment and swaybar end links but, what helped most of all was a recalibration of ride height with the mag ride.

Same issue on the SS we own as well turned out to axle bolts on drivers side..

The good thing is if you complain about these symptoms they are all covered they may even replace tires if they've worn from the issue.

There should be enough ideas here to start with..

10-19-2018, 06:18 AM	#11
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	I had the issue on my zl1 did an alignment and swaybar end links but, what helped most of all was a recalibration of ride height with the mag ride. Same issue on the SS we own as well turned out to axle bolts on drivers side.. The good thing is if you complain about these symptoms they are all covered they may even replace tires if they've worn from the issue. There should be enough ideas here to start with.. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber