CAMARO6 - View Single Post - Purchased Eibachs was it a easy job on a MRC equipped car?

Klayman · 10-17-2018, 06:59 PM

Took me about 7 hours to do front and back with hand tools. Make sure you have all the tools/sizes you need. (metrics up to 21 or 22 I think, and a pass through 18mm socket and extension, metric allen keys) My son assisted with the fronts. Make sure you raise and lower the vehicle at the correct lift points.

I put BMR springs in, but it should be the same. 4 wheel alignment when done.

PS: if you use a regular floor jack, it will be too high when you lower the front....I lowered the wheels on to 4x4's and made a small ramp of wood to roll off of.....

10-17-2018, 06:59 PM	#3
Klayman Drives: 2017 2SS A8 Black Join Date: Mar 2017 Location: NC Posts: 250	Took me about 7 hours to do front and back with hand tools. Make sure you have all the tools/sizes you need. (metrics up to 21 or 22 I think, and a pass through 18mm socket and extension, metric allen keys) My son assisted with the fronts. Make sure you raise and lower the vehicle at the correct lift points. I put BMR springs in, but it should be the same. 4 wheel alignment when done. PS: if you use a regular floor jack, it will be too high when you lower the front....I lowered the wheels on to 4x4's and made a small ramp of wood to roll off of..... __________________ Man is born free, and everywhere he is in chains