CAMARO6 - View Single Post - Installing an Elite Engineering E2-X catch can on an LT1 w/ ProCharger

mjoffsetkustoms · 10-14-2018, 06:54 PM

I have a 2018 2SS 1LE with a ProCharger Stage II w/P1-X head unit. I ordered an Elite Engineering E2-X catch can and quickly realized the instructions per their website would not work at all for my set up. So, after a bit of time staring at my car and the E2-X system, I figured it out, so here are the install steps for this catch can on a car with a ProCharger.

Step 1. Remove the driver's side rail cover (I no longer have valve covers, so that step isn't necessary for me) for ease of access. Loosen the clamp for the filter tube. This will be need to be removed to provide clearance so that you can replace the stock oil cap with the CSS cap. Once the CSS cap is in place, put the filter and tube back and retighten the clamp.

10-14-2018, 06:54 PM	#1
mjoffsetkustoms Drives: 2018 1LE 2SS Join Date: Jun 2018 Location: New Caney Texas Posts: 5	Installing an Elite Engineering E2-X catch can on an LT1 w/ ProCharger I have a 2018 2SS 1LE with a ProCharger Stage II w/P1-X head unit. I ordered an Elite Engineering E2-X catch can and quickly realized the instructions per their website would not work at all for my set up. So, after a bit of time staring at my car and the E2-X system, I figured it out, so here are the install steps for this catch can on a car with a ProCharger. Step 1. Remove the driver's side rail cover (I no longer have valve covers, so that step isn't necessary for me) for ease of access. Loosen the clamp for the filter tube. This will be need to be removed to provide clearance so that you can replace the stock oil cap with the CSS cap. Once the CSS cap is in place, put the filter and tube back and retighten the clamp. Attached Images