[ryansalazan24]

Originally Posted by cooper1965

Here is an update from Jason:


"We're going to start selling them, but there will be two different versions. The "Tune version", which is what we will start slowly selling, is what you have. I'm calling it that because it still throws a check engine light on a stock tune, where as a person with tuning ability can tune around that to keep it off, or simply disable the check engine light. The "Tune version" "should" provide maximum performance as it is set up not to leak at all. The tune version works completely fine on a stock tune, but I get a check engine light once every 1 to 3 weeks, but its nothing to be concerned about, just clear the light and keep enjoying.

So that said, we are still working on the "Stock tune version", which will have a small leak built in, to allow the ecm to stay happy. Hopefully, my plan is to make the leak to act like some kind of "low speed bypass", that will allow the valve to enough below say, 7-10psi to keep the check engine light off, and then above that psi, the orifice will close and seal to be leak free above that. If I can't pull that off, than the stock tune version valve, will just have a built in leak at all times to keep the check engine light off. It will take some experimenting to find out how big of a leak it will take to keep the check engine light off. It will hopefully be less than the stock valve, but obviously more than the tune version that doesn't leak."


Here is a look at the pre-sale "tune version" valve I received from JacFab!!!!

Awesome! I'm in for results for sure! Cant wait!