Quote:
Originally Posted by USAFS197
How much shorter of a throw is this compared to the 1LE shifter?
|
The reduction in throw when compared to the SS/ZL1 shifter is 40%.
Quote:
Originally Posted by Nicul15
If we buy the other stick that has the ball can they be swapped out in the car?
|
I checked the installation instructions for both shifters and the upper stick for either shifter is installed from the top, inside the vehicle. Yes, it can be exchanged from within the vehicle. If you purchase the Hurst Billet/Plus with the white Hurst shift ball you will still need to purchase the upper stick adaptor that is used to mount the OEM shift knob. I am still working with production in an attempt to get either the part number for the upper stick for the OEM knob or letting my superiors know that the owners of the previous shifter want and need that upper stick to mount the OEM knob.
Quote:
Originally Posted by Booher
I've been wanting this since I got my car, just didnt like the big ol cue ball! Its 40% over the ss, 20% over the 1le I believe. Hey hurst, could this work with the raceseng camaro adapter to make it threaded for other shift knobs?
|
I took a look at their website and it looks like they have two adaptors available. One is specific to their shift knobs (part #081208 to fit 3/4x16 shift knobs). The other adaptor (part #081102 to fit 9/16-8 shift knobs) would work in conjunction with the white Hurst ball shifter, part #3916031.
Quote:
Originally Posted by Dubchitts
Any chance you could share the service part number of the upper stick for those who already have the shifter?
|
Still working on getting that info for the forum.
I know you Gen 6 owners that have the traditional Hurst Billet/Plus shifter are dying to get the upper stick so you can use that beautiful Alcantara shift knob. If you haven't already, please post your request for the upper stick on this thread or PM me. Your opinion is invaluable to us and one way of getting this to market is to make your voices heard. Thanks for all of your interest and let's see some PM's!
- Jason @
Hurst