|
Make sure that the gasket in between the upper and lower intake is black. If it's red it will cause a vacuum leak. Also, use the bolts the provide for everything including the sensors that bolt on to the side of the intake. Also, make sure you have all the bolts the connect the upper to lower portion of the intake.
I have had many issues with mine and they had to mail me new bolts and gaskets
__________________
2022 Vivid Orange M6 LT1 - 2" ARH headers with cats and offroad setup (full system,), 3" ARH Pure Thunder mufflers, ported MSD intake, Soler 95mm tb, Rotofab CAI, E85 flex fuel, tuned by Jason@snackbartuning, Forgestar D5 18x8 fronts with 245/40/18 and Forgestar D5 17x10 rears with 275/40/17 summer tires.
Old car 2016 M6 SS - MSD intake, Rotofab, 2" ARH headers with cats, E85 with EFI Tuning. Best ET: 11.7@122mph
|