[Ryephile]

Tiny update: The BMR rear anti sway bar bushing mounting bracket bolts, all 4, worked their way loose. Not just "not torqued anymore", but about 4 turns undone! The clanking in the rear end was very obvious as the bushings floated around. For a 10mm head bolt, they're now torqued beyond what they should be, and far beyond what they were with stock brackets. In retrospect I should've put some blue threadlocker on them. I suppose if they come loose again I will, possibly in combination with nord-locks. The Hotchkis ARB bushing mounts up front use a different design flange that don't "spring" against the fastener head, so they didn't loosen.