CAMARO6 - View Single Post - SS 1LE/ZL1 MRC strut mod to achieve more negative camber up front

travislambert · 07-28-2018, 08:33 PM

I'm doing this mod this weekend. What I noticed was the top of the knuckle contacts the strut with almost nothing removed from the elongated holes.

I'm shaving a tiny amount of material from the back of the knuckle just above the threaded adjustment hole (where it contacts the strut restricting the camber).

Don't worry. I'm test fitting as I go to ensure the wheel won't rub.

I was at -2.2 before. I'll report back once I get the car realigned. I'm thinking anything -3.0 or better will make it worthwhile.

07-28-2018, 08:33 PM	#5
travislambert Drives: '17 ZL1 Join Date: Jul 2016 Location: Fairmont, WV Posts: 1,567	I'm doing this mod this weekend. What I noticed was the top of the knuckle contacts the strut with almost nothing removed from the elongated holes. I'm shaving a tiny amount of material from the back of the knuckle just above the threaded adjustment hole (where it contacts the strut restricting the camber). Don't worry. I'm test fitting as I go to ensure the wheel won't rub. I was at -2.2 before. I'll report back once I get the car realigned. I'm thinking anything -3.0 or better will make it worthwhile.