CAMARO6 - View Single Post - LT4 Supercharger Conversion Expansion Tank

BlueCamaro6 · 07-18-2018, 08:05 AM

I wanted a stock looking vehicle with the extra hp, so I went with the LT4 supercharger conversion. I didn't like the factory fill procedure, so I opted to put a coolant expansion tank in. Curious on thoughts of it looking like a factory item since it is a GM replacement item that fits really good.....

The supercharger intercooler coolant output (vent plug) I hooked up to the top portion of the expansion tank so the coolant pump would circulate all fluid and relieve the air in the system. This seemed to work good on initial start up. Anybody else do it this way and have results good or bad?

07-18-2018, 08:05 AM	#1
BlueCamaro6 Drives: 2018 Camaro 2SS, Hyper Blue Join Date: Jun 2016 Location: Next Level Tuning - Chicago Posts: 186	LT4 Supercharger Conversion Expansion Tank I wanted a stock looking vehicle with the extra hp, so I went with the LT4 supercharger conversion. I didn't like the factory fill procedure, so I opted to put a coolant expansion tank in. Curious on thoughts of it looking like a factory item since it is a GM replacement item that fits really good..... The supercharger intercooler coolant output (vent plug) I hooked up to the top portion of the expansion tank so the coolant pump would circulate all fluid and relieve the air in the system. This seemed to work good on initial start up. Anybody else do it this way and have results good or bad? Attached Images __________________ 2018 2SS, A8, NAV, NPP, MRC, Sunroof, Hyperblue, LT4 S/C, LT4 Fuel System, RotoFab CAI, Headers, HiFlo Cats 2016 2SS, A8, NAV, NPP, MRC, Sunroof, Hyperblue (GM buyback) 1999 Trans Am Firehawk, M6, headers, no-cats, slp exhaust, hot cam, intake, 3:73 gears. Red/Blk