Quote:
Originally Posted by meSSohappy
Hey guys. I posting on every thread I see regarding 305/35/20 MT DRs. Mine are mounted on my factory 15 ZL1 rims and They rub on my inner fender on my 18 ZL1. I tried 8mm spacers but that only leaves 4.5 turns on mynlug nuts. How are you making these tires fit?
|
Drivers side only? Take the fenderwell liner off and move that connector and harness. Lots of threads on this. Stay away from spacers but if you do them make sure you are getting at least 8 Turns on the lug nuts. If less you will need longer lugs or ditch that tire an wheel setup.
Also it's possible 35s are too tall relative to the front tire diameter. If so Stabilitrac will keep you from tracking.