CAMARO6 - View Single Post

shinysun · 07-01-2018, 07:05 AM

Hello,

I am using TSP stage 1 cam with Whipple.

From the maker, I was advised to use the table below in Name: KakaoTalk_20180701_205439132.jpg
Views: 763
Size: 167.0 KB

Name: KakaoTalk_20180701_205439132.jpg
Views: 763
Size: 167.0 KB

but to use all zero'd for WOT condition.

I am wondering why is that. Isn't it more efficient to use the VVT at high rev? for both partial and WOT?

and one more question,

up to which number of spark timing advance can I use if there are no knocks? I am using 24* with meth , no knocks. If I put more timing , the more power?

07-01-2018, 07:05 AM	#1
shinysun Drives: 2016 Camaro SS Join Date: Jul 2016 Location: Korea Posts: 417	VVT table on WOT with aftermarket cam. Hello, I am using TSP stage 1 cam with Whipple. From the maker, I was advised to use the table below in but to use all zero'd for WOT condition. I am wondering why is that. Isn't it more efficient to use the VVT at high rev? for both partial and WOT? and one more question, up to which number of spark timing advance can I use if there are no knocks? I am using 24* with meth , no knocks. If I put more timing , the more power? Last edited by shinysun; 07-01-2018 at 07:37 AM.