CAMARO6 - View Single Post

Vtor_ZL1 · 06-27-2018, 10:06 PM

Make your own.. its not too hard, but having holes and everything pre-engineered saves you hours of back and forth between CAD ( cardboard assisted design ) and actual parts.

Add in buying roll of VHB, material selection, do you use ABS, do you use polyethylene, nylon, etc tool to cut, shape, sand, file, etc.

We should all encourage people to DIY firt.. that way they can better appreciate a well made, well designed products. With that said, rear ZL!-addons rock guards fit piss poor with included spacers.. you'll need 2 x 1" spacers and longer bolts for better fit.

06-27-2018, 10:06 PM	#15
Vtor_ZL1 Who Needs to KNOW? Drives: 18 ZLE Join Date: May 2018 Location: Left Side of the Moon Posts: 1,853	Make your own.. its not too hard, but having holes and everything pre-engineered saves you hours of back and forth between CAD ( cardboard assisted design ) and actual parts. Add in buying roll of VHB, material selection, do you use ABS, do you use polyethylene, nylon, etc tool to cut, shape, sand, file, etc. We should all encourage people to DIY firt.. that way they can better appreciate a well made, well designed products. With that said, rear ZL!-addons rock guards fit piss poor with included spacers.. you'll need 2 x 1" spacers and longer bolts for better fit. Attached Images __________________ ing for grip. Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/