Quote:
Originally Posted by 17rsvert
How much air flow is typical for the vented seats set on high? I'm suprised that I can barely feel any airflow.
|
I did a little test for you.
This is on the Fifty edition seats. I believe the central perforated leather area is the same as the other leather seats, but not sure.
I took a piece of copy/printer paper (20 lb.) and tore it to about 5.5 x 6".
Place the paper over the seat bottom in the middle and up against the seat back.
With ventilated seats off, paper lays flat.
On setting with 3 LED's lit, paper edges will raise about 1/4".
Reduce to 2 LED's, and it drops about 1/32". Small amount, but noticeable.
Reduce to 1 LED, and it drops another 1/32".
I repeated the sequence a couple of times and was able to reproduce my results.