[Camaro SS Mike]

Hi I am new to the Forum. I was wondering if anybody had any experience doing a seat upgrade. I have a 2017 Camaro 1SS with cloth interior. I have an available 2SS leather interior to put in my car. Of course the plugs to the seat lineup but there is more pins in the 2SS plug obviously because the 2SS seats are cooled,and heated seats,not to mention memory seats. My 1SS seats obviously are just power only.I already know about how to take the seats out and seatbelts. So I took both driver seats out of the car and when I put my 1SS clothe seat in the 2SS the Power seat worked fine but when I put the 2SS leather seat in my 1SS they didn’t work at all. In hindsight I realize that was stupid to do the swap without considering the airbags as in what if the airbags activated if the pins were not aligned right! Anyway, I’m thinking I could rearrange the wire Pins within the plug to align and make at least the power portion of the 2ss leather seats work. Obviously without installing switches and wiring on the 1SS I will be unable to use the cooled and heated seats but I don’t care about that I just want the leather seats to at least have power. Does anybody know of anyone that has custom seat harnesses for this swap or do I have to custom do it myself? I really would like to reuse the plugs and existing wires as opposed to getting new ones from the Chevrolet parts department. I found a few wiring diagrams of the seat but not one that shows the individual wires and pins going into the plug. Anybody’s input would sure be helpful, and very appreciated, thanks Mike