Quote:
Originally Posted by Hyper1SS
Here is my setup all installed using the Sub by Thumps plug-n-play wire harness. I use the factory ground locations for the AudioControl and Kicker amp. I ran the power to both at the battery. Everything sounds clean and the amp is receiving a clean signal from the AudioControl unit. I used the front speaker signal to get a full range signal to not choke the bass. I might end up installing some 200hz bass blockers to the door speakers to let the sub do all of the bass work.
|
Just curious why do you have one12v on the lc2i going to the fuse box and the other to the battery. I’ve been confused wouldn’t it still work if there was just one 12v wire going straight to the battery? Also on your remote wire did you use remote out?