CAMARO6 - View Single Post - track PD with Converter or Centri without?

TEEZYSS · 06-15-2018, 12:32 PM

According to Kevin aka hog his car did have a F1A on meth that went a high 9 second pass through manifolds and the stock convertor. According to Procharger the largest pulley or lowest psi on the F1A for our cars is 10-12psi and would 100% require 100% meth. Kevin did tell me that the stock motor let go because he was using the normal pre TB sprayer which did not distribute equally causing it to go lean. He ended up going to direct port meth with no issues.

06-15-2018, 12:32 PM	#9
TEEZYSS Drives: 2016 CAMARO 2SS Join Date: Apr 2017 Location: ATX Posts: 272	According to Kevin aka hog his car did have a F1A on meth that went a high 9 second pass through manifolds and the stock convertor. According to Procharger the largest pulley or lowest psi on the F1A for our cars is 10-12psi and would 100% require 100% meth. Kevin did tell me that the stock motor let go because he was using the normal pre TB sprayer which did not distribute equally causing it to go lean. He ended up going to direct port meth with no issues. __________________ 2016 SS A8 STOCK 12.35@113.6 DA 1956 PRAY E85 TUNE,PRAY PORTED IM/TB,ROTOFAB DRY, DRAG PACK 11.33@121.8 DA 1248 PRAY PORTED MSD, 2" TSP LT's 11.38@122.4 DA 3664 GFORCE DRIVESHAFT,LME 174 T-STAT,ATI UDP up next...