CAMARO6 - View Single Post

Carlos_MRRWheelsInc · 05-24-2018, 01:03 PM

Hello let me help out a little here.

The OE front wheel is a low offset / what this means is that there is much more aluminum mass on the center of the wheel which is also the heaviest part of any wheel no matter what the size and width may be.

Now compare that to the rear wheel being a high off set 42et or so/ the rear has a total of almost 20mm of aluminum mass taken off from the center of the wheel which = less weight. if the rear wheel was the same off set as the front then it will weigh slightly more then the front.

this is true to all wheels/ a low off set wheel will weigh in more then a high off set wheel compared to the same wheel design

same is with our rep version M716 the rear is around the 224-25 and the front is 26. some.

05-24-2018, 01:03 PM	#4
Carlos_MRRWheelsInc Drives: camaro Join Date: Nov 2011 Location: los angeles ca Posts: 404	Hello let me help out a little here. The OE front wheel is a low offset / what this means is that there is much more aluminum mass on the center of the wheel which is also the heaviest part of any wheel no matter what the size and width may be. Now compare that to the rear wheel being a high off set 42et or so/ the rear has a total of almost 20mm of aluminum mass taken off from the center of the wheel which = less weight. if the rear wheel was the same off set as the front then it will weigh slightly more then the front. this is true to all wheels/ a low off set wheel will weigh in more then a high off set wheel compared to the same wheel design same is with our rep version M716 the rear is around the 224-25 and the front is 26. some.