CAMARO6 - View Single Post

Hyper1SS · 05-13-2018, 07:58 PM

If this is out there please post the link. I could not find them. So browsing the internet I have found several answers but most were for the 5th Gen Camaro. I recently installed TSP 1 7/8 headers with cats on my 2016 SS M6. I also have the 3" MBRP race catback exhaust system. I have never done much to my Camaro's besides simple bolt ons like a cold air intake so this is all new to me. So is it a good or bad idea to drive around like this without a tune? Will it cause issues where I need to change the plugs? If so what do you recommend? I bought the HP Tuners and AEM wideband and was going to have a remote tune done but don't feel comfortable enough right now to do that myself plus heard it would only be around 85% what I need so I decided to have a shop so a dyno tune but they are 1.5 hours away from me. I just want to get the right and correct answer for the Gen 6 and LT1 engine. It did throw a engine light and when I checked they were for the two O2 sensors I do not have hooked up after the cats. Thank you

05-13-2018, 07:58 PM	#1
Hyper1SS Drives: 2016 Hyper Blue Metallic 1SS M6 NPP Join Date: Jan 2016 Location: Indiana Posts: 891	Headers and tune? If this is out there please post the link. I could not find them. So browsing the internet I have found several answers but most were for the 5th Gen Camaro. I recently installed TSP 1 7/8 headers with cats on my 2016 SS M6. I also have the 3" MBRP race catback exhaust system. I have never done much to my Camaro's besides simple bolt ons like a cold air intake so this is all new to me. So is it a good or bad idea to drive around like this without a tune? Will it cause issues where I need to change the plugs? If so what do you recommend? I bought the HP Tuners and AEM wideband and was going to have a remote tune done but don't feel comfortable enough right now to do that myself plus heard it would only be around 85% what I need so I decided to have a shop so a dyno tune but they are 1.5 hours away from me. I just want to get the right and correct answer for the Gen 6 and LT1 engine. It did throw a engine light and when I checked they were for the two O2 sensors I do not have hooked up after the cats. Thank you __________________ 2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates. Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges Order ID: TDHQMS 1100 on 01/07/2016 at Penske Chevrolet 6000 on 02/23/2016 Delivered to customer Last edited by Hyper1SS; 05-14-2018 at 05:00 AM.