CAMARO6 - View Single Post - Cam swap without removing the engine or opening the AC system.

Mavericka70 · 05-08-2018, 02:24 PM

I saw some people asking if it was possible to do a cam swap without pulling the engine or opening up the ac lines, and never saw any definite answers to that question. I just wanted to point out that it is possible, because I just did it. After removing the radiator, you can lower the condensor without disconnecting any of the lines, giving a very clear shot at the cam.
Overall, this swap wasnt all that bad. If you're patient with all the plastic clips and shrouds on the front end, I don't see any reason to pull the engine for a cam swap. I'm almost done, and I think I'll have about 22 hours of labor in it(including valve springs, trunnion upgrade, etc). I'd be happy to answer any questions, and I hope this helps someone who is on edge about doing this like I was.

05-08-2018, 02:24 PM	#1
Mavericka70 Drives: '17 1ss m6 Join Date: May 2018 Location: Arkansas Posts: 17	Cam swap without removing the engine or opening the AC system. I saw some people asking if it was possible to do a cam swap without pulling the engine or opening up the ac lines, and never saw any definite answers to that question. I just wanted to point out that it is possible, because I just did it. After removing the radiator, you can lower the condensor without disconnecting any of the lines, giving a very clear shot at the cam. Overall, this swap wasnt all that bad. If you're patient with all the plastic clips and shrouds on the front end, I don't see any reason to pull the engine for a cam swap. I'm almost done, and I think I'll have about 22 hours of labor in it(including valve springs, trunnion upgrade, etc). I'd be happy to answer any questions, and I hope this helps someone who is on edge about doing this like I was. Attached Images