CAMARO6 - View Single Post - SS 1LE/ZL1 MRC strut mod to achieve more negative camber up front

Norm Peterson · 04-18-2018, 09:35 AM

Nice, thanks.

Guys, you should be able to estimate how much to grind from the center to center distance between the upper and lower holes and using a little trig. They're pretty close together, so a little (like maybe 1.0 mm) really does go a long way (maybe a whole degree).

I did a very similar modification on a Mazda 626 that I used to autocross.

Norm

04-18-2018, 09:35 AM	#3
Norm Peterson corner barstool sitter Drives: 08 Mustang GT, 19 WRX Join Date: Jul 2012 Location: Eastern Time Zone Posts: 6,990	Nice, thanks. Guys, you should be able to estimate how much to grind from the center to center distance between the upper and lower holes and using a little trig. They're pretty close together, so a little (like maybe 1.0 mm) really does go a long way (maybe a whole degree). I did a very similar modification on a Mazda 626 that I used to autocross. Norm __________________ '08 GT coupe 5M (the occasional track toy) '19 WRX 6M (the family sedan . . . seriously)