Quote:
Originally Posted by dw760
Hey Cal & Stress
Here's the link, they go up and down a bit in price but still a deal. Perfect diameter.
https://www.amazon.com/dp/B073SQRYB3...v_ov_lig_dp_it
As far as the pucks, let me take a look at mine and get back to you here
>>> Boom ! I found them in my orders in 2014 !
https://www.amazon.com/Corvette-Jack...cm_wl_huc_item
All you do is remove the eye bolts & T nuts, then carefully epoxy to the jack pads. I used my black silicone seal, put a little weight on them all night .... Done !
Trust me this is a nice set up, I tried a few on my 17 1LE and was never happy.
Just keep in mind if your using a floor jack to be on flat smooth cement. Then have the jack wheels lined up so the jack can roll smoothly when jacking up the car. And of course a low profile jack may be needed.
Cheers Dale  |
Thanks Dale! That's perfect for me even without the pucks. I don't plan on installing them permanently. Looks like they'll rest neatly in the cradle of my racing jack if I take out the rubber pad. As an added bonus, I can probably use them for my family's other vehicles with pinch-weld lift points.
--Cal