|
Important: Just because a ground connection is "tight" or the ground cable will not rotate under the fastener, this does not mean the ground is making a good connection.
There may paint under the cable eyelet, glue from the cable manufacturing process, etc., that may still be preventing the circuit from making a good connection to ground.
They have been doing this for forty plus years - paint under ground terminal. Discouraging.
More than one have found the engine ground mentioned here to be the root cause.
n
__________________
Go from the presence of a foolish man, when thou perceivest not in him the lips of knowledge
General Motors ASEP, A.S. Automotive Technology, Telecommunications Specialist, CISCO Network Engineer
STANDARD DISCLAIMER
camaro5 is furnishing this information "as is". camaro5 does not provide any warranty of the information whatsoever,
whether express, implied, or statutory, including, but not limited to, any warranty of merchantability
or fitness for a particular purpose or any warranty that the contents of the information will be error-free.
|