Well, have spent about eight hours on the car so far and I must say... the hellion turbo system is a very detailed and extensive installation.
A few things for anyone who is installing this kit;
very helpful tools:
1. harbor freight trim tool removal set
2. remote action radiator hose clamp tool
3. electric 3/8 ratchet for bumper cover to fender 7mm screws.
I've managed to remove/install the front bumper cover, intercooler, high pressure fuel pump and tackle numerous small tasks on the hellion instructions.
Ran into some serious friction on trying to remove four fuel injectors with the rail. soaking them with some PB Blaster now and hoping this evening they pop on out.
Tonight I hope to tackle removing the manifolds/cats & installing all the heat tape/tubes.
After a quick glance it seems like i'm missing the air cleaners from hellion along with some other items such as the spark plugs and what not. i'll go over the parts list they had in the box and see what is checked off and what not. Oh and the turbo's still haven't shown up..
