Quote:
Originally Posted by CruzinQueen
We just installed the MRT v. 2 Axle Backs on my V6 'vert....nothing but trouble getting the pipes pre-muffler to not hit those cross-braces. It's still knocking somewhere mid-stream by the resonators when the system is cold or if I hit some big bumps (not difficult to do here in mid-Michigan).
Back on the lift it goes...
|
I just looked at MRT and they cut in front of the hangers on the V2 on their website. There is a flat spot just rear of the hangers, and then a straight section of round just behind that where most axle-backs are cut. It looks like MRT tried to get rid of the flat pipe too by replacing it and the hanger. They probably also cut out your AFM valves if you have NPP. The problem is, the flat pipe is in there to clear the braces on the convertible.
-Geoff
__________________
'12 2SS RS Convertible - Traded in.
'16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold!
'23 2SS Convertible -Same as above except orange.