so I received my product, great people over at Elite Engineering, I didn't receive any instructions, the instructions on there website isn't clear, and what they sent me via email is more geared for centri set up. That said I have attached some pictures with descriptions on what I have questions with. I'm telling you. there is ABSOLUTLY NO ROOM under the hood. Only real space I had was in front of all the pulleys. I have spent close to 2 hours trying all different scenarios as to where to put it.
I feel that where its located is the best spot and made sure that the T stat housing is as tight maybe a few lbs in. tighter than when it came off just as a safety measure. '
Here I have the placement of the bracket they gave me. They actually gave me a few options, but this seems to work the best. yah or nay??
Another view
Another....
Here is where it gets a little confusing.... according to the R&D dude at Elite, I would need to tap into this line or so he states, and this will route to one of the exit lines on the can??
This hose is where it connects currently to the brake booster line.
This is where the (relocated line goes to under the charger PVC) which would be a PITA to get to with out remove the supercharger completely. Assuming that this will connect to the middle of the can or the "enter"??
And here is where the Can is installed but the lines are not ran yet.
Thoughts and help is so much appreciated during this confusing time... Hell, I can install the supercharger with out any issues or hick ups, but this for some reason has my mind blown away...
Ryan