CAMARO6 - View Single Post

SnakeEyeSS · 03-20-2018, 03:53 PM

If anyone wants to be preventative, You can buy felt pads for the bottom of thiings so they don't mark up your furniture, walmart and hardware stores will have them. Get a a few, cut them to the correct size and stuff them in the slot. Example
https://www.amazon.com/gp/aw/d/B001W...wML&ref=plSrch
Example
Another thing is to get thin weather stripping like go under doors, that would fit too if you get the thin sizes. If you can't find black get a Sharpie, although this would probably be would of sight
https://www.amazon.com/dp/B000052033..._tsxSAb6BZXCXH

Both of these are adhesive and may actually prevent rattles if plastic is touching out of sight. I have been thinking of taking part of the dash apart because I test drove 6 used ones before I bought my new one and they ALL rattled to various degrees in the dash

03-20-2018, 03:53 PM	#13
SnakeEyeSS Drives: Camaro 2SS & ZL1 Join Date: Mar 2018 Location: Oklahoma Posts: 877	If anyone wants to be preventative, You can buy felt pads for the bottom of thiings so they don't mark up your furniture, walmart and hardware stores will have them. Get a a few, cut them to the correct size and stuff them in the slot. Example https://www.amazon.com/gp/aw/d/B001W...wML&ref=plSrch Example Another thing is to get thin weather stripping like go under doors, that would fit too if you get the thin sizes. If you can't find black get a Sharpie, although this would probably be would of sight https://www.amazon.com/dp/B000052033..._tsxSAb6BZXCXH Both of these are adhesive and may actually prevent rattles if plastic is touching out of sight. I have been thinking of taking part of the dash apart because I test drove 6 used ones before I bought my new one and they ALL rattled to various degrees in the dash