Quote:
Originally Posted by FLYNNZL1
I just tried this Mod on my 2017 ZL1. I do not have the metal contacts where the ground is either. Also where the wire comes out of the fuse tap pointing down in the picture I have a Squire relay (K6) See in red on Picture using the pic from the SS above) in that spot making it impossible to insert the fuse tap as shown. I tried it the other way, and it does not work. I am not sure if I put the white wire in the correct position, and even turning the fuse tap the other way it may not be seating correctly. I looked for a fuse tap with the wire mounted on the other side, no luck so far. If anyone is successful with this on a 6Gen ZL1 please post a situation.
|
I meant to post this to the other thread you posted in a couple of days ago. You have the same problem I did but it's an easy fix. See this post/thread
http://www.camaro6.com/forums/showpo...4&postcount=28
__________________
Current: '17 2SS Hyper Blue, A8, MRC, NPP
Past: '99 SS Camaro A4, '73 Camaro 383 A3
"Voices in your head are not considered insider information."
3800 Status - 6/16/16 (Built!)
6000 status - 6/29/16 (Delivered!)
|