Quote:
Originally Posted by TDS
I have a set of drags for my car that I did not install TPMS sensors on. Have not ran them yet. Can you please fill me in on what I need to do. I would have just installed sensors if I would known this.
|
It's pretty easy to do. Have the vehicle in "run" with engine on or off (push and hold the start button without touching the pedals to put it in run without starting the engine). From there, use the RH steering wheel controls on the steering wheel to go to your tire pressures page. Push or push and hold (sorry, I don't specifically remember) the SEL button on the steering wheel to enter TPMS learning mode. From there, I believe you can either click "dismiss" or wait for the TPMS learning mode to time out. That should clear the saved TPMS data I think. Only downside to this method is you need an El-50448 or other compatible TPMS relearn tool to re-program your sensors.
Quote:
Originally Posted by Poppacapp
There is a "Secret" method to allow full control over PTM.trac control on the C7 Vettes when the car doesnt see a tpms . They call if the Easter Egg mod... simple press the traction control button 6 times within 5 seconds and the trac control light should blink a few times. you should now be able to access all the modes. This will last until the car is shut off. Have to redo after every restart.
I am unfamiliar if they have the same item for the Camaros. Just offering the info out there.
|
Interesting, didn't know this. Would be a better option to clearing the sensors if it works on Camaro. Will have to check it out!