Quote:
Originally Posted by Mark114
Agreed with Bradford on the front wheels.
The factory offset for the rear wheels is +39 mm so the 9.5" wheel with +35mm would sit out about 1/4" wider than factory. That shouldn't be a problem.
The 11" wheel is wider than the factory rear Goodyear tire. Mounting it on an 11" wide wheel will look stretched. If you're not planning to buy wider tires then it will look better on the 9.5" wheel IMHO.
|
So I just want to get this correct. The lower number offset will move the wheels outward, correct? And the higher number, inward? What if I went with the 9 1/2 inch rim for the front with the 35 mm offset? This should put the rim in a very similar position to original, would it not? Is there clearance on the inside of the wheel So that it will clear the calliper and not rub on anything else?