CAMARO6 - View Single Post - WARNING: Front end Clunk - Loose Sway Bar Endlinks (please check yours)

Soleil · 01-21-2018, 10:27 AM

- lower torque 89ft lbs (120Nm)
- upper torque 74ft lbs (100Nm)
- I use normaly LOCTITE 243
- put the bolt through and than apply the Loctite
- you put a few drops at the location where the nut will sit.

Here ist the corresponding Service Bulletin #16 Pic6276 Clunk Noise From Front Suspension

01-21-2018, 10:27 AM	#170
Soleil Drives: Camaro 50th anniversary edition Join Date: May 2017 Location: Europe Posts: 2,203 View My Garage	- lower torque 89ft lbs (120Nm) - upper torque 74ft lbs (100Nm) - I use normaly LOCTITE 243 - put the bolt through and than apply the Loctite - you put a few drops at the location where the nut will sit. Here ist the corresponding Service Bulletin #16 Pic6276 Clunk Noise From Front Suspension __________________ Soleil _____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)